Rhinestone template materials compared: flock, rubber, foam and card
Rhinestone template materials compared: flock, rubber sheets, craft foam and cardstock, and how each one cuts, holds stones and lasts on a home machine.

For rhinestone template material, flock is the usual choice on a home cutting machine: it cuts cleanly on a flock setting, its soft surface helps stones settle, and a cut template lasts for many shirts. Rubber template sheets are a sturdier option if your machine can cut them, while craft foam and cardstock are only good for a quick test.
Products vary from maker to maker, so treat this as a general guide and follow the instructions for the sheet you buy.
Template materials at a glance
| Rhinestone flock | Rubber template sheet | Craft foam | Cardstock | |
|---|---|---|---|---|
| Surface | Soft, fuzzy top | Smooth, firm | Smooth foam | Paper |
| Helps stones settle | Yes | Varies | Somewhat | Poorly |
| Cuts on a home machine | Yes, flock setting | Depends on the sheet and machine | Often, with care | Yes |
| Reusable | Many shirts | Many shirts | A few fills | Not really |
| Holds fine gaps | Well, on a backer | Well | Can tear | Frays |
| Best for | Most home crafters | Heavy use, where it cuts cleanly | Trying a design | Checking size and placement |
Rhinestone flock
Flock is a thin sheet with a fuzzy top, an adhesive back and a paper liner. It's what most home crafters use, and it's what our method and How-to-Use guide are written for.
To cut it, keep the paper backing on, put it flock side up, choose your machine's flock material setting and run a test cut first. If the circles don't pop out when you weed, add pressure or fit a fresh blade; if the flock tears while weeding, the blade is dull. Our guide to cutting rhinestone templates goes through the settings step by step.
Once weeded, stick the flock to a backer board. The fibres give stones a little grip, which helps them flip shiny side up as you brush in small circles. Keep the template on its backer and store it flat, and it will last for many shirts.
Rubber template sheets
Rubber template material is a thicker, firmer sheet sold for rhinestone work, often used on larger or more powerful cutters. It holds its shape well and can be reused many times.
The catch is cutting. Depending on the product and your machine, it may need a deeper blade, more pressure or more than one pass, and some home machines won't cut it cleanly. Cut a small test section before a full design, and check the material's own instructions.
Craft foam
Thin craft foam is easy to find, and some crafters use it for a first try. It can work for a few fills, but foam can stretch, leave rough edges or tear between holes. That matters most on small holes: our SS6 holes are .100 in, and the flock between holes is at least .03 in (0.76 mm).
Use foam to test a design, not for a template you plan to keep.
Cardstock
Cardstock cuts on almost any machine, but paper holes fray quickly and stones don't settle well in them. It's useful in a different way: print the design on paper to check its size and placement on the shirt before you cut flock. The PDF in each of our packs prints at true size for exactly that.
What else you need
Whatever material you cut, the rest of the kit is the same:
- A backer board to hold the template flat while you brush.
- Hotfix rhinestones in the size the template is cut for (see hotfix vs non-hotfix).
- Clear hotfix transfer tape to lift the filled design.
- A brush, and a tray to catch spare stones.
Which should you pick?
- Pick flock if you have a home cutting machine and want templates that last. It's the standard choice.
- Pick rubber template sheets if your machine cuts them cleanly and you press the same designs often.
- Pick craft foam if you want a low-cost trial of a design before buying flock.
- Pick cardstock if you only need to check size and placement.
Want something to test your material on? Our free templates are full packs in SS6, SS10 and SS16.
FAQ
What material is used for rhinestone templates?
Most home crafters use rhinestone flock: a fuzzy sheet with an adhesive back that cuts on a flock setting. Rubber template sheets are another option where your machine can cut them.
Can I cut rhinestone flock on a home cutting machine?
Yes. Machines such as Cricut Maker and Explore can cut it on a flock setting with a sharp blade. Do a test cut first, and if circles don't pop out, add pressure or change the blade.
Can I use regular vinyl for a rhinestone template?
Regular craft vinyl is usually too thin to hold stones in place while you brush. Use flock or a material sold for rhinestone templates.
How many times can I reuse a flock template?
Many times, if you keep it stuck to its backer and store it flat. Replace it when holes tear or stones stop settling. See reusing and storing templates and, if something goes wrong, our troubleshooting guide.





