Cart (0)

Hotfix vs non-hotfix rhinestones: what's the difference?

Hotfix vs non-hotfix rhinestones: how each one sticks, the tools you need, which works with a template, and which to use for shirts, tumblers and shoes.

Compare · 4 min read ·

Hotfix vs non-hotfix rhinestones: what's the difference?

Hotfix vs non-hotfix rhinestones comes down to the glue: hotfix stones have heat glue already on the back, so a heat press or iron bonds them to fabric, while non-hotfix stones have no glue and you stick each one down yourself. For a rhinestone shirt made with a template, you need hotfix stones.

Non-hotfix stones still have their place, mainly on hard or heat-sensitive things that can't go under a press.

Hotfix vs non-hotfix at a glance

Hotfix rhinestones Non-hotfix rhinestones
Glue Already on the back, melts with heat None; you add an adhesive
How you apply them Heat press or iron, whole design at once Glue and place, stone by stone
Works with a template Yes, made for it No: nothing bonds them when pressed
Good surfaces Fabric that takes heat: tees, hoodies, totes Hard surfaces and items that can't be heated
Speed for a large design Fast once the template is filled Slow
Before washing Wait 48 hours Depends on the glue

Hotfix rhinestones

Hotfix stones carry a layer of heat glue on the flat back. You brush them into a template, lift them on clear hotfix transfer tape and press. At 320-335 °F (160-168 °C) for 10-15 seconds, with medium to firm pressure, the glue melts into the fabric and grips it as it cools.

That's what makes template work quick. Our Christmas Wreath has 1,136 stones at SS10, and every one of them goes on in the same press. The glue needs heat, pressure and dry fabric, so pre-press the shirt for a few seconds first. If a stone lifts when you peel, lay the tape back and press again.

Hotfix stones come in the sizes our templates are cut for: SS6 (2.0 mm), SS10 (2.8 mm) and SS16 (3.9 mm). The full method is in how to make a rhinestone shirt.

Non-hotfix rhinestones

Non-hotfix stones, often sold as flat-back or no-glue stones, have a plain back. You put a little adhesive on the surface and set each stone with tweezers or a pick-up tool. Use an adhesive made for the material you're decorating, and follow its cure time before you use or wash the item.

They suit things a heat press can't reach or would damage: tumblers, phone cases, shoes, hair clips and cards. You can place them on curves and in tight spots, one at a time. For a filled shirt design with over 1,000 stones, that's a lot of hand work.

Can you use non-hotfix stones with a template?

A template only places stones; it doesn't hold them on the shirt. Non-hotfix stones could fill the holes, but with no glue on the back there's nothing to bond them when you press. For shirts, use hotfix. Keep non-hotfix stones for glue projects.

How to tell them apart

Check the label first: hotfix stones are usually sold as "hotfix" or "HF". On the stone itself, a hotfix back has a visible glue layer, often grey or slightly rough, while a non-hotfix back is usually smooth. If you're unsure, press a few onto scrap fabric and see whether they hold.

Which should you pick?

  • Pick hotfix if you're making a shirt, hoodie or tote with a template.
  • Pick hotfix if the design is large: one press sets every stone.
  • Pick non-hotfix if the item can't take heat or won't fit in a press, like a tumbler, phone case or shoe.
  • Pick non-hotfix if you're adding a few stones by hand as an accent.

The stone material matters too. See glass vs resin vs acrylic rhinestones.

FAQ

What does hotfix mean on rhinestones?

Hotfix means the stone has heat glue already on its back. Heat from a press or iron melts the glue so it bonds to fabric.

Can you iron on hotfix rhinestones?

Yes, for small pieces. Use the cotton setting with no steam, press hard for 20-30 seconds per spot without sliding, and let it cool a little before peeling. For larger designs a heat press gives more even heat and pressure: see heat press vs iron.

Do hotfix rhinestones come off in the wash?

Pressed well and cared for, they should hold. Wait 48 hours before washing, then wash inside out, cold and gentle, and hang to dry. Stones that fall off usually had too little heat, time or pressure, or were pressed onto damp fabric.

Can I use hotfix rhinestones without heat?

Not as intended. Without heat the glue doesn't melt, so you'd need to add your own adhesive, as with non-hotfix stones.

Templates in this article

Shop all

Keep reading

All guides

New free templates by email.

Sign up and get 20% off your first order.

About twice a month. Unsubscribe any time.