Cart (0)

Heat press vs iron for rhinestones: which should you use?

Heat press vs iron for rhinestones: settings, time, pressure and results for each, and when an iron is fine and when a heat press is the safer choice.

Compare · 3 min read ·

Heat press vs iron for rhinestones: which should you use?

For heat press vs iron for rhinestones, a heat press is the better tool: it gives even heat and firm pressure across the whole design, so every stone bonds in 10-15 seconds. An iron works for small pieces if you press hard, spot by spot, with no steam.

If you make more than the occasional shirt, or your designs are bigger than a few inches, a heat press is worth having. For a single small word design, an iron can do the job.

Heat press vs iron at a glance

Heat press Household iron
Temperature 320-335 °F (160-168 °C) Cotton setting, no steam
Time 10-15 seconds, whole design 20-30 seconds per spot
Pressure Medium to firm, even Your arm: press hard, don't slide
Coverage The whole design at once One spot at a time
Design size Anything that fits the platen Small pieces
Consistency The same every time Varies with your pressure
Cost and space A bigger purchase, needs a table Already in most homes

Heat press

A heat press holds a set temperature and closes with even pressure, which is what hotfix glue needs. For rhinestones: 320-335 °F (160-168 °C), 10-15 seconds, medium to firm pressure, with parchment or a non-stick sheet on top.

Pre-press the shirt for a few seconds to dry it and flatten creases. Place the transfer, cover it and press. Let it cool a little, then peel slowly and low. If a stone lifts, lay the tape back down and press again. For extra hold, turn the shirt inside out and press 10 seconds from the back. Our heat press settings guide has more detail.

Large filled designs are where a press pays off. Our Love Letter is 10.05 × 6.22 in with 1,989 stones at SS10, and a press sets all of them at once, with the same heat at the centre and the edges.

Iron

An iron can set hotfix rhinestones on small designs. Use the cotton setting with no steam, lay parchment or a non-stick sheet over the tape, and press hard on one spot for 20-30 seconds. Lift, move to the next spot with a little overlap, and repeat. Don't slide the iron, or the stones can shift.

The weak points are heat and pressure. The steam holes in the plate can leave cooler spots, and it's hard to push as firmly as a press. Keep the iron for small pieces like our Mama word design, 8.49 × 2.44 in at SS10, and check every stone before you peel. Pressing again from the back can help them hold.

Handheld heat presses

A small handheld heat press sits between the two: a flat plate with more even heat than an iron, without the size of a full press. Settings vary by model, so follow its own guide for temperature and time, and press each section firmly with some overlap.

Which should you pick?

  • Pick a heat press if you make rhinestone shirts often, or sell them.
  • Pick a heat press if the design is large or has over 1,000 stones.
  • Pick an iron if it's a one-off, small design like a word or a small accent.
  • Pick an iron if you're trying rhinestones before buying more tools. A free template is a low-cost way to start.

Slim word designs like these are the easiest to press with an iron:

FAQ

Can you put rhinestones on with an iron?

Yes, for small designs. Use the cotton setting, no steam, and press hard for 20-30 seconds per spot without sliding. Let it cool a little and peel slowly.

What temperature do you heat press rhinestones at?

320-335 °F (160-168 °C) for 10-15 seconds at medium to firm pressure, with parchment or a non-stick sheet on top. Pre-press the shirt first, and check your stones' instructions too.

Why are my rhinestones falling off after pressing?

Too little heat, time or pressure, or the fabric was damp. Pre-press the shirt, then press again with the cover sheet. If a stone lifts while you peel, lay the tape back and press again. Our troubleshooting guide covers other problems.

How long should I wait to wash a rhinestone shirt?

Wait 48 hours, then wash it inside out on a cold, gentle cycle and hang it to dry. See how to wash rhinestone shirts.

Templates in this article

Shop all

Keep reading

All guides

New free templates by email.

Sign up and get 20% off your first order.

About twice a month. Unsubscribe any time.