Rhinestone Size for Kids Shirts: Toddler, Kids and Teen Tees
How to pick the rhinestone size for kids shirts: SS6 vs SS10 design sizes, measuring a toddler, kids or teen tee, kid-friendly designs and safety tips.

The usual rhinestone size for kids shirts is SS6, the smallest stone in our packs. It makes the same design about a fifth smaller than SS10, which suits the narrow chest of a toddler or kids' tee. Teens who wear adult sizes can usually take SS10, the size most adult bling shirts use.
Stone size is half the choice. The other half is design size, so measure the shirt you will press.
SS6 or SS10 for a kids rhinestone shirt
Every pack in our shop includes an SS6 file and an SS10 file, and most also include SS16. Each one is its own template at its own size. SS6 stones are 2.0 mm across and sit in .100 in (2.54 mm) holes. SS10 stones are 2.8 mm, in .135 in (3.43 mm) holes.
In our files, the SS6 version has the same number of stones as the SS10 version, packed into a smaller space. You keep all the detail, and the design shrinks, often by 1.5-2 in (4-5 cm) on its longest side. Four kid favourites, width × height:
| Design | SS6 size | SS10 size | Stones (both sizes) |
|---|---|---|---|
| T-Rex | 7.52 × 5.17 in | 9.48 × 6.52 in | 991 |
| Castle | 7.05 × 7.18 in | 8.88 × 9.04 in | 1,581 |
| Mermaid Tail | 7.14 × 7.15 in | 9.0 × 9.01 in | 991 |
| Gumball Machine | 4.9 × 7.2 in | 6.17 × 9.07 in | 1,219 |
At SS6, most of our designs are about 6-8 in on their longest side. At SS10 they are mostly about 6-10 in. Our SS6 vs SS10 vs SS16 comparison looks at the stones themselves in more detail.
Never shrink an SS10 file to fit a smaller shirt. The holes shrink too and stop matching your stones. Open the SS6 file instead.
Step 1Cut the templateFrom rhinestone flock, one hole for every stone
Step 2Brush in the stonesHotfix stones drop into the holes, shiny side up
Step 3Lift with transfer tapeThe clear tape picks up the whole design
Step 4Press onto the shirtHeat press or iron, let it cool, peel
Measure the shirt front first
Kids' shirts vary a lot between makers and cuts, so a size chart from us would only be a guess. A tape measure gives you the real answer.
- Lay the shirt flat, front up, and smooth it out.
- Measure straight across the front, seam to seam, just below the sleeves. This is the space the design has to sit in.
- Measure from the collar down to about the bottom of the chest. This is roughly how tall the design can be.
- Compare both numbers with the sizes on the product page. Leave some plain fabric on each side, so the design doesn't run towards the seams.
A quick check before you cut: our PDF files print at true size. Print the design, trim around it and lay the paper on the shirt. If it looks too big on paper, it will look too big in stones.
Toddler, kids and teen shirts
Toddler shirts. The chest is narrow, so width matters most. Start with the SS6 file and favour designs that are taller than they are wide. Gumball Machine is 4.9 in wide at SS6, and some of our smallest designs are narrower still (see below).
Kids' shirts. Many of our SS6 files sit comfortably on a kids' tee. Wide designs like Fire Truck (7.58 × 4.16 in at SS6) or Monster Truck (7.6 × 4.85 in) suit the bigger kids' sizes. Measure to be sure.
Teen shirts. Teens often wear adult sizes, so SS10 usually fits, just as on an adult tee. For a fitted cut or a smaller teen, use the SS6 file. For a bold look on a large shirt, most designs also come in SS16: the T-Rex is 10.68 × 7.34 in at SS16.
Place it a little higher and smaller
On an adult tee, the top of the design usually sits about 3 in (7-8 cm) below the collar. On a small shirt, use a smaller gap and judge it by eye. The design should sit on the chest, not drift towards the stomach.
Our rhinestone shirt placement guide walks through the crease, the height and lining up the transfer tape.
Designs kids like
These are all in our Jobs, School & Faith theme:
- Castle and Mermaid Tail, for fairy-tale fans
- T-Rex, for dinosaur lovers
- Monster Truck, Fire Truck and Train Engine, for anything with wheels
- Robot and Astronaut, for builders and space fans
- Kite and Gumball Machine, bright and simple. The Kite has 536 stones, so it fills quickly.
Some of our smallest designs
For a very small shirt, these are among the smallest designs we make, with their SS6 sizes:
- Ice Cream Cone: 3.74 × 7.17 in
- Cupcake: 4.05 × 6.61 in
- Dinosaur: 6.74 × 3.85 in
- Paw Heart: 5.71 × 5.83 in
Two of our six free templates, Heart and Paw Print, are about 6.3 × 5.7 in at SS6. Download them free and try a small shirt before you buy.
How many stones to buy
Because the SS6 and SS10 files use the same number of stones, the counts on each product page work for both sizes. Just buy stones that match the file you cut: SS10 stones won't fit SS6 holes.
Stones are often sold by the gross (144). Add about 10% spare and round up per colour. The Kite has 536 stones: Light Siam 196, Gold 201 and Light Blue 139. With spare, each colour comes to just over one gross, so you need 2 gross of each, 6 in all. Our guide to how many rhinestones you need has a calculator.
Safety and care
Rhinestones are small, so a few habits matter on kids' shirts:
- Keep loose stones, the filled template and any spills away from young children who still put things in their mouths. Tidy up before little ones play nearby.
- Press firmly so every stone holds: 320-335 °F (160-168 °C) for 10-15 seconds with medium to firm pressure, or as your stones' instructions say. If a stone lifts when you peel, lay the tape back and press again.
- Check the shirt after every wash. Re-press any loose stone, or pick it off, before a child wears the shirt again.
Wait 48 hours before the first wash, then wash inside out on cold and gentle, and hang to dry. Our washing guide has the full steps.
FAQ
What size rhinestones are best for kids' shirts?
SS6 suits most toddler and kids' shirts, because it makes the design smaller while keeping every stone. Teens in adult sizes can usually wear SS10. Measure the shirt front and compare it with the design size on the product page.
How big should a design be on a toddler shirt?
It depends on the shirt, so measure across the front and leave plain fabric at each side. At SS6, most of our designs are about 6-8 in on their longest side, and a few, such as Ice Cream Cone and Cupcake, are only about 4 in wide.
Can I resize a rhinestone template for a smaller shirt?
No. Shrinking the file shrinks the holes too, so they stop matching the stones. Use the SS6 file instead, which every one of our packs includes.
Do rhinestones stay on kids' shirts?
Hotfix stones bond to the fabric when you press them with enough heat, time and pressure on a dry, pre-pressed shirt. Wash gently, check the design after each wash and re-press any stone that lifts.













